What are the two types of Manual Switch operations?

Publish Time: 2025-03-08 03:40 Author: Site Editor Visit: 324

1. Momentary Operation: The switch is ON only while it is pressed. The switch turns OFF when it is released. 2. Alternate Operation: After you press the switch, the ON state is held even when the switch is released. To turn OFF the switch, you must press it again.

Last article：What are the two kinds of Resin Materials?

Next item：What is the definition of a switch?

Relevant News

Are there any points of caution for when hand soldering a Tact Switch?

Avoid bringing the tip of the soldering iron into contact with resin parts and applying too much pressure to terminals as it could affect the performance of the swit...

Can Tact Switch products be used in a held-down state?

We do not recommend operating them held-down.

+8617706878322

+8618066252060

Skype1:khancn2

Skype2:khancn4

GET A QUOTE

FAQ

1. Momentary Operation: The switch is ON only while it is pressed. The switch turns OFF when it is released. 2. Alternate Operation: After you press the switch, the ON state is held even when the switch is released. To turn OFF the switch, you must press it again.